To use the WAN port of the mdex router MX530/560/880 or the Teltonika RUT-series as an additional LAN port, the following steps are required:
mdex router & Teltonika RUT-series (legacy).
Here are the steps for mdex routers and the Teltonika RUT-series up to firmware version R_00.06. (Legacy Firmware):
- Login to WebUI of the router:
- Activate the Expert Mode (Only required on MX530/880) in the top right corner.
- Click on Network LAN, then click on the Advanced Settings tab.
- activate the parameter Use WAN port as LAN:
- Click Save to save the setting.
Now the WAN port of the router can be used as an additional LAN port.
Special functions of the mdex router that require a WAN port can now no longer be used.
Teltonika RUT-series (from firmware R_00.07.03)
Here are the steps for the Teltonika RUT-series from firmware version R_00.07.03.
- Login to WebUI of the router: (In "MODE: ADVANCED", the parameter for activation is not offered.)
- Click on Network LAN, then click on the edit icon.
- Activate the parameter Use WAN port as LAN:
- Click Save & Apply to save the setting.
Now the WAN port of the router can be used as an additional LAN port.
Special functions of the router that require a WAN port can now no longer be used.