Teltonika Router
Here you will find all manuals and instructions of Teltonika routers:
Teltonika manuals
FAQ
Firmware
Note the changed layout of the WebUI (web interface) since firmware version R_00.07.03!
- The mobile settings (APN, Username, Password) and LAN settings (IP address, DHCP server, etc.) are now located under
: Netwotk Interfaces | Description |
LAN: | Router LAN settings (IP address, DHCP server, ...) |
WAN: | WAN port settings |
MOB1S1a1: | SIM1 setup (APN, username, password, ... ) |
MOB1S2a2: | SIM2 setup (APN, Username, Password, ... ) - Dual SIM router only! |
- Other SIM settings, e.g. the SIM PIN, are set under .
Teltonika manuals
The following is a list of the most important router settings, exemplified by the RUT955.
(The WebUI structure is almost identical for all Teltonika routers).
|
WebUI (Legacy Firmware) |
WebUI (ab Firmware Version R_00.07.03) |
|
|
|
Mobile settings: |
|
(PIN, Service Mode, ...) (APN, Username, ...) MOB1S1a1 SIM1 MOB1S2a2 SIM2 (dual SIM router only) |
Failover (WAN <-> Mobile): |
|
|
Port Forwarding: Individual: All ports & protocols (dmz): |
|
|
Router remote access: |
|
|
WiFi: |
|
|
Mobile status: |
|
|
All notes, instructions and descriptions for the installation of all Teltonika routers are available at .
FAQ
In the following FAQ's you will find answers and suggested solutions from the mdex experts to questions about the Teltonika RUT series.
Firmware
Here you will find all the links to download the respective firmware and the instructions to perform the firmware update.
|
Firmware Download |
Update Instructions |
RUT240 |
1 |
|
RUT241 |
|
|
RUT950 |
1 |
|
RUT951 |
|
|
RUT955 |
1 |
|
RUT956 |
|
|
1 Important notes about legacy firmware.
- Only the RUT240, RUT950 and RUT955 routers were shipped with the Legacy Firmware and are compatible with it.
- Updated "Legacy FW" versions are still offered by Teltonika, which contain relevant security updates. We recommend that routers with legacy firmware only update to a newer legacy firmware.
- When using an mdex Easy SIM (KPN), ensure before upgrading from the "Legacy Firmware" to the current firmware version (R_00.07.xx) that the MTU is set to 1500 and not to 1120. For further instructions see FAQ Setting the MTU of an mdex SIM card.
- Please note that when updating the firmware from a "Legacy FW" to the current "Factory FW" (R_00.07.xx), an automatic migration of the router configuration is performed, provided that the corresponding option "Keep all settings" is selected in the router interface during the update process. However, we recommend a detailed test of the router functions after the update, as some configuration parameters may not be adopted correctly.